Quantcast
Channel: Aquarium Controllers
Viewing all 4495 articles
Browse latest View live

Neptune Apex DOS problems

0
0
So I have 2 DOS pumps and am dosing the triton Core7 which requires all 4 pumps. Problem is 3 of them are working great and one is allowing air to bleed back up into the line, so when it comes time to dose that one it doesn't drop any fluid. I replaced all the tubing twice, Made sure all the air was bled out of it, calibrated it, made sure all my fittings were tight (many times due to changing out the tubing). The first pump I purchased a while ago and it is working fine, the problem pump...

Neptune Apex DOS problems

Selecting multiple units in Fusion

0
0
Is there a way to select all of my Radion lights to edit all at one time? I would really like to play with the look of the lights but don't want to have to edit them all one at a time.

Thanks!

APEX Full vs Reefkeeper Elite

0
0
Why would you choose one over the other? I have been looking for a couple weeks and can't see much of a difference in them other than a label.

Can you fill me in? This would be my first time using a controller in 15 years.

APEX Controller vs Reef Keeper

0
0
I am thinking about getting a Controller for the tank and wanted to know which you would pick.

APEX w/ Lab grade probe setup

Reef Keep w/Net

Please let me know.

Apex (2016 model) and WXM

0
0
Radion Missing
Using the 2016 model apex, wxm module. I've updated all firmware and RF firmware. My radions are plugged into my EB32 in outlets 1 & 2, my outlets labeled radion are further down the outlet list and have "MISSING" next to the gear icon on apex fusion.

Apex, how to safely delete old unused settings

0
0
I purchased my Apex used and set it up for my system . I was told originally that it was reset but after I had set it up for my system I find many settings that I did not do myself. I'm assuming this is from the previous owner. How do I remove those settings safely?

Apex & starting over

0
0
I've had an Apex Lite running for years now. Transferred & expanded it when I went from a 36B to my 120G tank. Right now I have everything broken down, livestock in various holding tanks, while I rebuild the 120 tank and stand.
The history held in the Apex up to this point will be meaningless to the newly restarted 120G. So how best to reset everything to start fresh?

Thanks!

Ramp timer for mars aqua chinese LED

0
0
I have 2 chinese mars aqua 165w leds but i hate manually turning them on and adjusting the color all day, is there a controller or something that automatically ramps the intensity up and down? I know nothing of controllers or how they work and just want one for ramping my lights, any suggestions?

How do you calibrate probes on pm-1 module with no display?

0
0
I am adding a second setup to my existing apex. I was told I needed the probes, pm-1 module and eb8 as well as the cables. Got that... but how do you calibrate the probes with no display? Can that be done through fusion somehow?

I don't have it plugged in yet and am about to do so tonight but I was thinking about my question... Any help would be appreciated :D

Apex jr what's Important

0
0
I am a new reefer. I just picked up a new Apex Jr. I am trying to decide on which are the most important modules for me. So far I plan on an eb 8, wxm for my radion xr30 gen 3 and the new fmm. I want the fmm for leak detection and the optical sensors. I'm torn between a pm1 and a pm2. Which would serve me better for a mixed reef and fish build? Any other recommendations would be appreciated.

Remote camera viewing

0
0
I travel a lot and have aquarium fully automated for water changes, ato, feeder etc. However I want to add a video camera by my sump to monitor water level. With water changes and ato, and sump waste removal water height does fluctuate by maybe half an inch or so over few days. I want to be able to remotely see what water height is and if needed run a manual adjustment through apex to add bit more rodi or salt water or remove water. So question is.. What good wifi video camera would you...

Remote camera viewing

Apex Junior - what module or modules do i need

0
0
Hi

I just scooped up off a fellow reefer an Apex Junior, I'm going to use this for monitoring only through Fusion - want to be able to view on my IPhone when I'm away to make sure all params are good, heaters are on, lights are on.

So, It came with the Temp probe, so I need ph.,salinity, probes also want to control my 2 heaters through it and my 6 bulb ati fixture which has 2 plugs well actually three one for the fan which I could just plug into a regular power bar for an on off...

Apex Junior - what module or modules do i need

Need some good opinions!

APEX + Abyzz = Return Pump Nirvana: The Missing Guide

0
0
I have scoured the internet and not found this information anywhere, so I thought I would post this here as well as on the Neptune Forum. Hopefully the following will be helpful to a fellow reefer.

As this is posted, Abyzz America has the APEX cables in stock and they have been outstanding to work with. Here is a link to the cable you need to connect your APEX and Abyzz pump: http://www.abyzzamerica.com/Abyzz-Interface-Cable-for-APEX-Controller-p/a-va-intapex.htm

The physical...

APEX + Abyzz = Return Pump Nirvana: The Missing Guide

Apex with red dragon pumps

0
0
Has anybody set up there red dragon 230 -volt pumps to there apex ? The newest apex ?
I was told you could ramp the pumps up and down and could turn timer setting for a closed loop pump ?
Ten different speeds ?
Yes I bought the red dragon communication cord

ReefKeeper Lite Multi-Timer Function not working normally, please help!!

0
0
Today, i plugged the PC4 to computer and changed some name on PC4. I'm not sure if i did/messed up something but after that my Multi-Timer for ALK and CA is not working properly.
I set ALK run at 10 pm for 1:16 min for 10 times during the night, but for some reason it only runs once at 10 pm then wont kick in at 11,12,1,2,3,4,5,6,7) same for CA channel. I'm sure all settings are right as it used to work fine with same setting and all firmwares are up to date. I have 2 PC4, ALK is at channel...

ReefKeeper Lite Multi-Timer Function not working normally, please help!!

Apex; which can I run on EB4 & 8

0
0
Hi, I am trying not to lose a socket to a 6 way... I have 3 possible things I hope that can run off of eb4 or 8. Please let me know which, if any are possible.

finnex 300w titanium heater
led strip on block ac adapter
tunze ato

Thanks :)

Apex Jr

0
0
Okay I'm looking into getting a controller for my 120 gallon reef tank. I want to be able to control my return pump, my two heaters, protein skimmer and my dosing pump. I would also like to be able to get email alerts or text alerts is that possible with the jr.? And would I have to buy an extra power bar? Also not sure if it comes with a pH probe or not if anybody can answer my questions it would be greatly appreciated.

Disconnect apex power failer

0
0
Hay
everyday i get this message
Power from apex fails and will not connect
whenever the apex disappears than go my skimmer and pump out.how to prevent that?i have the apex now 2 months to use and I have only problems with it



Jebao Connection

0
0
I just want to make sure before I do it. The wire for the PP 8 from the controller to the pump is a standard Din5 connection? I want to use the APex variable port to control them.
Viewing all 4495 articles
Browse latest View live




Latest Images